How to Build Your Own Backyard BMX Ramp

BMX ramps look pretty straightforward, but in reality, they could buckle and hurt the rider if it wasn’t done properly.

This is why you need to really know how to build your own backyard BMX ramps the right way.

The ramps can be used indoors or outdoors, but if you’re looking to build one in your yard, then you’ll need to factor in the steps needed to build one for the outdoors.

Let’s go through the details you need to know to build your own backyard BMX ramp.

Popular materials used for ramps

Several materials can be used to build BMX ramps, such as wood, plastic sheets, metal tubing, and fiberglass.

The most popular material for building ramps is wood due to its affordability, availability, and ease of workability. Wood is easy to cut and fix, which is ideal for BMX ramps.

Wood ramps are incredibly cheap to make. It’s best to use 2×4 wooden planks to construct a ramp that is a little higher than a regular BMX bike.

How to build the BMX ramp

Three aspects need to be considered while building BMX ramps:

  1. The landing
  2. The slope
  3. The takeoff

These components must be present in BMX ramps for them to be safe BMX ramps.

The BMX ramp’s landing needs to look smooth so that riders can land easily after doing tricks on it.

The landing must be covered with metal or foam padding so that riders will not sustain injuries if they accidentally fall off the ramp while performing stunts.

The ramp’s slope is also crucial because it lets BMX riders move fast enough so that their momentum allows them to do some tricks before the ground again.

Thus, BMX ramps need to have a high ramp slope to ride bikes fast.

The takeoff is also a necessary component of ramps because BMX riders cannot perform tricks if they have nowhere to jump from.

Hence, the takeoff must be solid and sturdy enough so that riders don’t fall off while attempting stunts on it.

How much does it cost to build a BMX ramp

The cost to build a BMX ramp in your backyard can range anywhere from $100 to $20,000. It will depend on the material used and the size of the ramp you’re building.

Cost of wood BMX ramps

Wood BMX ramps are cheaper, with an estimated price of $100 for a ramp. They are the most popular type of ramps around.

The price of wood varies depending upon where you buy it and whether or not you’re getting enough wood to build an entire BMX park or just one small ramp for your backyard lawn.

Cost of metal BMX ramps

Metal BMX ramps require more work but are of higher quality.

Steel ramps can cost anywhere from $5,000 to $20,000, depending on the size and materials used.

Cost of plastic BMX ramps

Plastic BMX ramps are not very durable and usually crack or tear easily with high BMX jumps.

And it cost something around $30 to $70 depending on the dimension.

Cost of fibreglass BMX ramps

Fiberglass BMX ramps are expensive to manufacture and maintain but last a lot longer than other materials. They’re also the most durable among all other materials.

How to build a BMX ramp in your backyard

Building a BMX ramp in your backyard is surprisingly not as hard you might think.

You can get it done in a few steps:

Step 1: Decide on the ramp material

Different materials give a different experience when you ride and leap off it.

It also depends on your budget and what materials you can afford (and which would be more suitable to your local climate).

If you live in a more temperate climate, wooden or plastic ramps would do. But if you have a little more budget to spend, metal or fiberglass has the best durability.

Step 2: Decide the size of your BMX jump

The average height of a kid’s BMX jumps is about 2 feet, while an adult’s jumps could reach as high as 10 feet in height.

BMX jumps can be as long as ramps, but riders usually practice bike tricks on ramp surfaces that measure 10 feet in length.

Step 3: Determine the slope

The BMX ramp’s slope is a significant feature of ramps because it determines how fast riders will go when they ride bikes over them.

BMX jump slopes are around 20 to 30 degrees, while flat sides are about 0 to 5 degrees for landing variation.

Not finding the proper slope makes BMX jumping less exciting and more complex.

Step 4: Get necessary tools

You will need:

  1. Power drill.
  2. Metal file.
  3. Adjustable wrench.
  4. Sharpie marker.

You may also want to use spray paint to color your ramp.

Step 5: Start building the BMX ramp

Backyard BMX ramp

Start building the ramp by marking ramp plans.

Use a measuring tape to measure ramps from one end of the ramp to another.

Mark the jump height at the center of your ramps and mark the jumps’ landing points on both ends of the ramps.

Next, use a power drill and metal file to cut nails into ramp boards, if required.

If you plan on making more than a backyard BMX ramp, consider marking where each ramp board will be attached using a marker so you can quickly identify which boards should go together later on during construction.

Step 6: Place wood boards around the edges

Place even BMX ramp boards around the designed edges that you have made earlier or attach them using screws or nails.

Step 7: Attach jump boards to the ramps.

Attach BMX jump boards to BMX ramps, ensuring that the ramp’s height matches the BMJramp’s height.

Step 8: Cover the landing with metal or foam padding.

BMX ramps for sale need BMX pads or padding to prevent BMX riders from injuring themselves while jumping, especially if the ramp is higher than usual.

Step 9: Apply paint if necessary.

Paint your ramps with a color of your choice using spray paint after attaching wood parts using screws and nails.

Step 10: Place BMX ramp in the desired location

Finally, attach BMX ramps to jump boards by sliding screw or nail through holes located at the center of each board.

You are now ready to practice new tricks on your homemade BMX ramps!

Conclusion

BMX jumps can be made using different ramp materials, but ramps are usually made from wood because it’s cheap and easy to build ramps out of wood.

But if you have more money to spend, there’s no harm going for steel or even fiberglass for your backyard BMX ramp!