You’d be surprised how many people don’t actually insulate or heat their sheds. If you want to work comfortably, you should keep your shed heated.
There are many ways to heat a shed in your backyard.
In this article, I’ll explain the 5 most common tips that are used to heat a shed.
- 1 What is the most efficient way to heat a backyard shed?
- 2 1. Install insulation around the shed
- 3 2. Only consider effective heating solutions
- 4 3. Pick the ideal eco-friendly solution
- 5 4. Don’t forget to keep the floor warm
- 6 5. Know the size of your shed
- 7 What to consider before installing your heating solution
- 8 Final Thoughts
What is the most efficient way to heat a backyard shed?
Most sheds can measure anywhere between 100 square feet to 300 square feet. So your heating solutions will need to take your shed’s size into consideration.
A lot of people prefer all-natural or eco-friendly heating solutions like solar power. That’s because natural solutions are very affordable, easy to install, and quite efficient.
Using a heater is probably the most no-brainer solution and is commonly used for heating both small-sized and medium-sized sheds.
But did you know that there are plenty of other alternatives you can try? Here are five different types of solutions for heating a shed in your backyard:
1. Install insulation around the shed
The idea is to contain heat in the shed. There is no better way to do this than to use quality thermal insulators.
You should install premium quality insulators depending on the shed’s construction. If you have a wooden shed, then the foil-faced foam board is the best choice.
The types of insulation that works well for sheds are:
Insulated Concrete Forms (ICFs)
These are reinforced insulation forms used in concrete structures. If you have a concrete shed in your backyard, then these are the correct insulation to use.
These type of insulators seal different floorings, walls, and ceiling cavities to prevent air movement and keep the room temperature constant.
Spray-on insulation is, however, not the best alternative for places with more extreme temperature fluctuations.
Structural Insulated Panels (SIPs)
These are cost-effective, energy-efficient, and high-performance insulation panels installed in modern homes.
The insulation panel has an interior and exterior sheathing with a foam core fitted in between the sheath.
Pro Tip: Installing most foam insulation guarantees warmth even at night.
2. Only consider effective heating solutions
Heaters come in diverse designs. Some advanced, while others a little more old-fashioned. Some popularly used heaters are fan heaters, coil and cable heaters, band heaters, ceramic panel heaters, and infrared heaters.
Other homeowners prefer to use furnaces or central heating boilers. These two heating solutions are not only traditional. Boilers and furnaces can cheaply maintain warmth in your shed throughout the winter season.
Before picking a heater for your shed, make sure that it’s flexible. Baseboard heaters, for instance, are fixed in a particular position. But this is not an ideal choice for a backyard shed.
Space heaters are portable and flexible solutions that can be used in different rooms to raise the temperature.
Pro Tip: Heaters allow you to adjust the overall temperature to your preferred specifications.
3. Pick the ideal eco-friendly solution
Most eco-friendly heating solutions can keep the backyard shed warm for hours. Among these eco-friendly solutions are solar panels.
Solar energy can be harnessed directly to produce efficient heating solutions. For instance, you can install a transparent roofing sheet to let natural light and heat in the shed.
Pro Tip: Eco-friendly solutions are energy savers. Consider the ideal alternative for efficient outcomes.
4. Don’t forget to keep the floor warm
If the floor is kept warm, the entire structure will be warm during winter.
A spray form is by far the most effective floor heating solution. Other options like a rigid form and wood are cheaper alternatives.
If the above options do not deliver maximum results, you need to install tubular floor heaters. These heaters are low-cost solutions with efficient results.
5. Know the size of your shed
Knowing the size of the shed helps you decide on the ideal type of heater to use.
The two most efficient heaters for small-size rooms include:
- Infrared heaters: Standard tower heaters, wall heaters, and panels
- Ceramic or space mini heaters
The two most efficient heaters for medium-size/large rooms include:
- Fan heaters
- Coil or cable heaters
Pro Tip: If you have a medium-size shed without the correct heater, you should use additional ceiling fans to push hot air and distribute it to the entire room.
What to consider before installing your heating solution
There are a few factors you should always consider before installing a heater or any similar heating solution.
The cost of heating a shed is one crucial factor you should check. Using electricity, for instance, is costly compared to the other options.
Energy Efficiency and Wattage
Energy efficiency is the process of conserving energy and maximizing heat production. Advanced HVAC systems are home installations whose principal function is to provide heating and ventilating solutions with maximum efficiency.
So you need an installation that precisely fits your backyard shed.
Long Term vs Short Term Solutions
Check whether your heating solution will last up to a decade. Insulating the entire shed is one long-term solution that you should appreciate. You are guaranteed a decade or two if you have quality insulating form installed on the walls.
Maintaining heat in a shed can be challenging if you have not considered the correct heating solution. Heaters and artificial solutions require extensive maintenance. Eco-friendly solutions like solar remain efficient solutions with low maintenance.
Safety is another crucial factor you should consider before picking a heating solution. Note that all eco-friendly heating alternatives are safe and non-hazardous.
Fan heaters and other kinds of heaters tend to be unreliable when faulty.
The best space heater should have these few features; a Cool-touch exterior, an automatic tip-over shutoff button, and a temperature display screen.
Remember that all heating solutions should be efficient, safe, and easy to set up. They should have an adjustable thermostat. Trust me, it’ll make a world of difference!
Also, as I mentioned before, you’ll need to know the exact size of your shed before purchasing a heater. That way you won’t overspend and only get what you need to heat your shed with little to no wastage.